|
2007年6月15日、ラスベガスの
Fry's
で
CISCO Linksys SPA2002
というアナログ2ポートの SIP アダプタを買いました。
値段は29.99ドルなので州税込みで32.31ドル・・・日本円に換算すると3,900円くらいと思います。
この SIP アダプタは
Sipura 社の SPA2002
と全く機能が同じようです。
外観は違うのですが、コネクタの並びやその他のスペックは同じです。
| Enter IVR Menu | * * * * | None | Ignore SIT or other tones until you hear, “Sipura
configuration menu. Please enter option followed by the pound key or hang-up to exit.” |
| Exit IVR Menu | 3948 | None | |
| Check DHCP | 100 | None | IVR will announce if DHCP in enabled or disabled. |
| Enable/Disable DHCP | 101 | Enter 1 to enable
Enter 0 to disable |
Requires Password |
| Check IP Address | 110 | None | IVR will announce the current IP address of SPA. |
| Set Static IP Address | 111 | Enter IP address using numbers on
the telephone key pad. Use the * (star) key when entering a decimal point. |
DHCP must be “Disabled”otherwise you will hear,
Invalid Option,” if you try to set this value. Requires Password |
| Check Network Mask | 120 | None | IVR will announce the current network mask of
SPA. |
| Set Network Mask | 121 | Enter value using numbers on the
telephone key pad. Use the * (star) key when entering a decimal point. |
DHCP must be “Disabled” otherwise you will hear,
“Invalid Option,” if you try to set this value. Requires Password |
| Check Static Gateway IP Address | 130 | None | IVR will announce the current gateway IP
address of SPA. |
| Set Static Gateway IP Address | 131 | Enter IP address using numbers on
the telephone key pad. Use the * (star) key when entering a decimal point. |
DHCP must be “Disabled” otherwise you will hear,
“Invalid Option,” if you try to set this value. Requires Password |
| Check MAC Address | 140 | None | IVR will announce the MAC address of SPA in
hex string format. |
| Check Firmware Version | 150 | None | IVR will announce the version of the firmware
running on the SPA. |
| Check Primary DNS Server Setting | 160 | None | IVR will announce the current setting in the
Primary DNS field. |
| Set Primary DNS Server | 161 | Enter IP address using numbers on
the telephone key pad. Use the * (star) key when entering a decimal point. |
Requires Password |
| Check SPA’s Web Server Port | 170 | None | IVR will announce the port that the web server
is listening on. (Default is 80) |
| Enable/Disable Web Server of
SPA |
7932 | Enter 1 to enable
Enter 0 to disable |
Requires Password |
| Manual Reboot of Unit | 732668 | None | After you hear “Option Successful,” hang-up. Unit
will reboot automatically. |
| User Factory Reset of Unit
WARNING: ALL “User-Changeable” NON- DEFAULT SETTINGS WILL BE LOST! This might include network and service provider data. |
877778 | Enter 1 to confirm
Enter *(star) to cancel operation |
SPA will prompt for confirmation. After
confirming, you will hear “Option Successful.” Hang- up. Unit will reboot and all “User Changeable” configuration parameters will be reset to factory default values. |
| Factory Reset of Unit
WARNING: ALL NON-DEFAULT SETTINGS WILL BE LOST! This includes network and service provider data. |
73738 | Enter 1 to confirm
Enter * (star) to cancel operation |
SPA will prompt for confirmation. After
confirming, you will hear “Option Successful.” Hang- up. Unit will reboot and all configuration parameters will be reset to factory default values. |
System Information Host Name: SipuraSPA
| User | （なし） |
| admin | 0rLhnT34vBg2SqwbSoDyGslvF |
